Set of 4, Multi Ship Squadron Adapters for flight stands, 3d printed resin flight stands bases for aircraft and starships
$4.00
This is a set of adapters to mount several small ships or fighters to a single base. Bases and ships are sold separately. Sold in sets of 4, the prices are the same so if you want a mix of styles just message me or write your preferences in the order notes. These were designed for my 2mm Peg stands, but should work for any stand that is 2mm or less in diameter. I got the tolerances as tight as I can manage, but I would still recommend gluing any attached models to ensure a secure fit. These are a little over 1" across, roughly between 24-26mm.
Current versions have 1mm tops, and either 3, 4, or 6 arms. I'll have more versions soon.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Current versions have 1mm tops, and either 3, 4, or 6 arms. I'll have more versions soon.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Arm Number:
Quantity:
This is a set of adapters to mount several small ships or fighters to a single base. Bases and ships are sold separately. Sold in sets of 4, the prices are the same so if you want a mix of styles just message me or write your preferences in the order notes. These were designed for my 2mm Peg stands, but should work for any stand that is 2mm or less in diameter. I got the tolerances as tight as I can manage, but I would still recommend gluing any attached models to ensure a secure fit. These are a little over 1" across, roughly between 24-26mm.
Current versions have 1mm tops, and either 3, 4, or 6 arms. I'll have more versions soon.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Current versions have 1mm tops, and either 3, 4, or 6 arms. I'll have more versions soon.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
This is a set of adapters to mount several small ships or fighters to a single base. Bases and ships are sold separately. Sold in sets of 4, the prices are the same so if you want a mix of styles just message me or write your preferences in the order notes. These were designed for my 2mm Peg stands, but should work for any stand that is 2mm or less in diameter. I got the tolerances as tight as I can manage, but I would still recommend gluing any attached models to ensure a secure fit. These are a little over 1" across, roughly between 24-26mm.
Current versions have 1mm tops, and either 3, 4, or 6 arms. I'll have more versions soon.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Current versions have 1mm tops, and either 3, 4, or 6 arms. I'll have more versions soon.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.