Hex Flight Bases/Stands, *Please read the description*, 3d printed resin flight stands bases for aircraft and starships
from $4.00
This is a Set of 3d printed flight stands for aircraft and starship miniatures.
Each of order is for multiple stands by base diameter:
4 of the 1" bases.
3 of the 1.5" bases.
2 of the 2" bases.
Longer stands increase cost due to longer print times.
Models not included.
Stands are separated by base style, base size, and stand size, with more variations coming in time.
Bases have a 1.5mm void underneath them for adding magnets or metal plates for magnetic storage. Magnets are not included.
I currently have 2 stand types, a flat top, and a peg top.
The flat top versions come with either a 1mm, or 3mm tip, and are for models that don’t have peg holes, such as mine own.
The peg top is 2mm, and fits all of the aircraft, and starship models I own.
I have plans for squadron, fighter, and magnetic stands for the future.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Each of order is for multiple stands by base diameter:
4 of the 1" bases.
3 of the 1.5" bases.
2 of the 2" bases.
Longer stands increase cost due to longer print times.
Models not included.
Stands are separated by base style, base size, and stand size, with more variations coming in time.
Bases have a 1.5mm void underneath them for adding magnets or metal plates for magnetic storage. Magnets are not included.
I currently have 2 stand types, a flat top, and a peg top.
The flat top versions come with either a 1mm, or 3mm tip, and are for models that don’t have peg holes, such as mine own.
The peg top is 2mm, and fits all of the aircraft, and starship models I own.
I have plans for squadron, fighter, and magnetic stands for the future.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Base Style:
Stand Style:
Quantity:
This is a Set of 3d printed flight stands for aircraft and starship miniatures.
Each of order is for multiple stands by base diameter:
4 of the 1" bases.
3 of the 1.5" bases.
2 of the 2" bases.
Longer stands increase cost due to longer print times.
Models not included.
Stands are separated by base style, base size, and stand size, with more variations coming in time.
Bases have a 1.5mm void underneath them for adding magnets or metal plates for magnetic storage. Magnets are not included.
I currently have 2 stand types, a flat top, and a peg top.
The flat top versions come with either a 1mm, or 3mm tip, and are for models that don’t have peg holes, such as mine own.
The peg top is 2mm, and fits all of the aircraft, and starship models I own.
I have plans for squadron, fighter, and magnetic stands for the future.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Each of order is for multiple stands by base diameter:
4 of the 1" bases.
3 of the 1.5" bases.
2 of the 2" bases.
Longer stands increase cost due to longer print times.
Models not included.
Stands are separated by base style, base size, and stand size, with more variations coming in time.
Bases have a 1.5mm void underneath them for adding magnets or metal plates for magnetic storage. Magnets are not included.
I currently have 2 stand types, a flat top, and a peg top.
The flat top versions come with either a 1mm, or 3mm tip, and are for models that don’t have peg holes, such as mine own.
The peg top is 2mm, and fits all of the aircraft, and starship models I own.
I have plans for squadron, fighter, and magnetic stands for the future.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
This is a Set of 3d printed flight stands for aircraft and starship miniatures.
Each of order is for multiple stands by base diameter:
4 of the 1" bases.
3 of the 1.5" bases.
2 of the 2" bases.
Longer stands increase cost due to longer print times.
Models not included.
Stands are separated by base style, base size, and stand size, with more variations coming in time.
Bases have a 1.5mm void underneath them for adding magnets or metal plates for magnetic storage. Magnets are not included.
I currently have 2 stand types, a flat top, and a peg top.
The flat top versions come with either a 1mm, or 3mm tip, and are for models that don’t have peg holes, such as mine own.
The peg top is 2mm, and fits all of the aircraft, and starship models I own.
I have plans for squadron, fighter, and magnetic stands for the future.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.
Each of order is for multiple stands by base diameter:
4 of the 1" bases.
3 of the 1.5" bases.
2 of the 2" bases.
Longer stands increase cost due to longer print times.
Models not included.
Stands are separated by base style, base size, and stand size, with more variations coming in time.
Bases have a 1.5mm void underneath them for adding magnets or metal plates for magnetic storage. Magnets are not included.
I currently have 2 stand types, a flat top, and a peg top.
The flat top versions come with either a 1mm, or 3mm tip, and are for models that don’t have peg holes, such as mine own.
The peg top is 2mm, and fits all of the aircraft, and starship models I own.
I have plans for squadron, fighter, and magnetic stands for the future.
Feel free to message me with any questions or suggestions you may have.
Models are made to order, come unpainted, and without a base. Processing time depends on how long it takes to print, cure, and clean the models. 3d printed models will have small imperfections where the supports attach, and I’ve done my best to minimize support marks. Layer lines are minimal and tend to be covered when painting. I’m always working to improve my prints.